请问卫生间门怎么安装？卫生间门安装步骤图解「记得收藏」

卫生间门怎么安装

主要步骤是：安装前开包验货、安装中要严丝合缝、安装后要检查有无问题。首先，安装前应当检查卫生间的门是否有问题，包括门的颜色款式等，还要检查门零件的数量。安装的时候，要将门套装配紧密相连，同时保证其间无缝隙，门套对角线保持正确，2m以内公差小于等于1mm，2m以上小于等于1.5mm。门框与墙体之间的缝隙要用发泡胶填充，倘若墙体不平，也要保证接口的平整。门安装成功后，检查 门扇是否有异响，门套与门扇之间，左右应当为3-4mm，下缝大概在10mm左右。

卫生间门安装步骤图解

卫生间门是卫生间的重要组成部分，为了方便使用，避免影响卫生间使用，卫生间门也需要进行安装。

下面为大家介绍卫生间门的安装步骤：

第一步：选择好门的型号和尺寸，以确保门可以完美适合卫生间门洞的大小。

第二步：在门洞上进行定位，用钢笔或者尺子进行标记。

第三步：根据标记的位置进行排钉，将门框固定在门洞上。

第四步：使用水平仪调整好门框的水平位置，确保门框直立。

第五步：使用电钻在门框上进行打孔，安装好门框。

第六步：移除门框上铁钉，打开门，将门扇固定在门框上，确保门扇与门框的间隙均匀且无捻曲。

第七步：安装门锁、门把手和门扣等配件。

需要注意的是，安装门的过程需要专业人员进行。如果您没有经验或者技能，请尽量寻求专业支持，以免发生安全问题。

【英文介绍/For English】：

The main steps are: open the package and inspect the goods before installation, fit the seam tightly during installation, and check whether there are any problems after installation. First of all, before installation, you should check whether there is any problem with the door of the bathroom, including the color and style of the door, and also check the number of door parts. When installing, the door cover assembly should be closely connected, and at the same time ensure that there is no gap between them, the diagonal line of the door cover should be correct, the tolerance within 2m is less than or equal to 1mm, and the tolerance above 2m is less than or equal to 1.5mm. The gap between the door frame and the wall should be filled with styrofoam. If the wall is not flat, the interface should be flat. After the door is installed successfully, check whether the door leaf has any abnormal noise. The left and right between the door cover and the door leaf should be 3-4mm, and the bottom seam should be about 10mm.